AusSci

Year 6 science · Physical sciences · AC9S6U03

Why won’t it light?

1Build it

Make it light

What does a circuit need before a bulb will light?

You have a battery, a bulb, a switch and three wires. Join them so that the bulb lights, then work out what every part is doing.

How this lesson works

After you build a working circuit, most of this lesson is about circuits, drawings and ideas that have a mistake in them. Teachers call these erroneous examples. Each one was made by a student who got something wrong. Your job is to find the mistake, explain it and fix it.

  1. On this screen, build a circuit that works, so you know what a working one looks like.
  2. On screens 2 to 6, find the mistake in someone else’s circuit, diagram, claim, results table or safety poster. Choose what you think is wrong, then test it or fix it.
  3. After each one, write the mistake in your own words in your notebook. Writing it down helps you remember it.

On this screen

  1. Click two terminals to join them with a wire. Light the bulb.
  2. Put the switch in the loop. Turn the bulb off and on with it.
  3. Try one wire straight from one end of the battery to the other, and see what happens.
  4. Read the key idea, then answer the questions.

A battery stores energy in the chemicals inside it. When a circuit is complete, the battery pushes an electric current round the loop. The current carries energy from the battery to the bulb, where it turns into light and heat. The wires are conductors, so the current can flow through them.

The circuit board

Simulation

The simulation loads here.

What a circuit needs

A bulb lights when there is a complete loop of conductors from one end of the battery, through the bulb, back to the other end. If there is a gap anywhere in the loop, no current flows and the bulb stays off. A switch is a gap you can open and close.

The battery is the source of energy. The current transfers that energy round the loop, and the bulb transforms it into light and heat. A wire straight from one end of the battery to the other is a short circuit: a very large current flows, the wire gets hot, and the battery soon goes flat. Never do that with a real battery.

What we are learning

What a circuit needs to work, how to draw one, how current behaves in a loop, which materials conduct, and how to stay safe with electricity at home.

I can

  • 1build a circuit that lights a bulb and explain what the battery, the wires, the bulb and the switch do.
  • 2find the mistake in a circuit that doesn’t work and fix it.
  • 3draw a circuit with the standard symbols and spot a diagram that doesn’t match its circuit.
  • 4use ammeters to show that the current is the same all the way round a loop, and compare bulbs in a row with bulbs in separate loops.
  • 5test materials to sort them into conductors and insulators, and say why wires have a copper core and a plastic cover.
  • 6spot electrical hazards at home and explain what a safety switch does.

Australian Curriculum: Science, Version 9, Year 6, AC9S6U03: “investigate the transfer and transformation of energy in electrical circuits, including the role of circuit components, insulators and conductors”. The teacher notes at the end show which screen covers each part.

My notebook

A bulb is joined to a battery by two wires, but it doesn’t light. Which of these could be the reason?

Where does the energy that lights the bulb come from?

What happens when a switch in a loop is opened?

2Find the mistake 1 of 5

Why won’t it light?

Four students built circuits that don’t work. What did each one get wrong?

Mia, Noah, Priya and Tom each built a circuit and were sure it would light. None of the bulbs lit. Find the mistake in each one, then fix it.

Find the mistake

Each circuit has one thing wrong with it.

Look at how the wires are joined and whether the loop is complete. Choose the mistake, press Fix it, and watch what changes. Then write the mistake in your own words.

On this screen

  1. Choose a student’s circuit and read what they say.
  2. Choose what you think the mistake is.
  3. Press Fix it and see the bulb light. Do all four.
  4. Write the mistakes in your notebook, then answer the questions.

Four circuits that don’t light

Simulation

The simulation loads here.

One loop, no gaps

Every one of these circuits had the same problem, each time in a different form: no complete loop. One wire isn’t enough, because current needs a path back to the battery. Two wires from the same end of the battery don’t go through the battery. A wire on the glass isn’t joined to the filament. An open switch is a gap.

Many people think current goes out along one wire and gets used up in the bulb. It doesn’t. The current flows round the whole loop, and the same current flows in the second wire as in the first.

My notebook

Mia joins the battery to the bulb with one wire. Why doesn’t the bulb light?

Noah joins both wires to the + end of the battery. What should he do?

Priya’s wire touches the glass of the bulb. Why doesn’t that work?

3Find the mistake 2 of 5

Draw it right

Does the diagram match the circuit?

Scientists and electricians draw circuits with the same set of symbols, so that anyone can read them. Three students drew diagrams of their circuits. Each diagram has two mistakes.

A circuit diagram uses a symbol for each part and straight lines for the wires. The key under the pictures shows the symbols: a cell is a long thin line and a short thick line, a battery is cells in a row (two in this lesson), a lamp is a circle with a cross, a switch is a line that can swing open, and an ammeter is a circle with an A. Arrows on the lines show the direction of the current, from the battery’s + end round to its − end.

Find the mistake

Compare each diagram with the real circuit beside it, and with the key.

Mark the parts you think are wrong, then press Check. When you have found both mistakes, press Show it drawn correctly and compare.

On this screen

  1. Choose a student’s diagram.
  2. Mark the parts that are wrong and press Check.
  3. Look at the diagram drawn correctly. Do all three.
  4. Write what the symbols are for in your notebook, then answer the questions.

Three diagrams to check

Simulation

The simulation loads here.

Why we use symbols

A diagram shows how the parts are joined, not what they look like. Everyone uses the same symbols, so a diagram drawn in Darwin can be read in Hobart. The lines must meet at every corner, because a gap in the drawing means a gap in the loop. The switch is drawn open or closed to match the real switch.

My notebook

Which symbol stands for a lamp in a circuit diagram?

Ben’s switch is open, but his diagram shows the switch closed. Why does that matter?

Which way do the current arrows point on a circuit diagram?

4Find the mistake 3 of 5

Is the current used up?

Does a bulb use up the current that flows through it?

Ari, Bo and Cam each made a claim about current. Some of them are wrong. The ammeters will settle it: an ammeter tells you how much current is flowing through it.

Current is measured in amperes (A). The torch bulb in these circuits takes about a quarter of an ampere, written 0.25 A. An ammeter is joined into the loop, so the current it measures flows right through it. The readings here come from the model, and real bulbs give slightly different numbers.

Find the mistake

Which claims are right and which are wrong?

Switch on each circuit and read the ammeters. Then mark each claim Right or Wrong. Two of the three students have made a mistake.

On this screen

  1. Read the three claims. Look at each circuit and decide whether you think each claim is right, before you switch anything on.
  2. Switch on the one-bulb circuit. Compare the three ammeters.
  3. Switch on the two-bulbs-in-a-row circuit. Compare the bulbs and the ammeters.
  4. Switch on the two-bulbs-in-separate-loops circuit. Compare again, and watch the battery’s energy bar.
  5. Mark each claim Right or Wrong, write in your notebook, then answer the questions.

Three circuits with ammeters

Simulation

The simulation loads here.

Current goes round, energy gets used

The current is the same everywhere in a single loop. It isn’t used up in the bulb and it doesn’t get weaker on the way back. The bulb uses energy: the current carries energy from the battery, and the bulb transforms it into light and heat, so the battery runs down even though the current comes back to it.

Two bulbs in a row share one loop, so less current flows and both are dim. Two bulbs in separate loops each get the full current, so both are bright, and the battery has to supply both loops, so its energy goes about twice as fast.

My notebook

A
A

Two bulbs are in a row in one loop. What do you see?

5Find the mistake 4 of 5

Conductor or insulator?

Which materials let current through, and why does it matter?

Ash tested ten things from the classroom in a circuit with a gap and wrote up a results table. Three rows are wrong. Test each material yourself and find them.

A conductor lets electric charge move through it easily. An insulator doesn’t. The tester is a battery, a bulb and three leads, two of them ending in clips with a gap between them. Put something in the gap: if the bulb lights, current is getting through it.

Find the mistake

Three rows of Ash’s table are wrong.

Test every material. After each test, mark Ash’s row Right or Wrong. Think about why Ash might have made each mistake.

On this screen

  1. Put each material in the gap and watch the bulb.
  2. Mark each row of Ash’s table Right or Wrong.
  3. Look at the inside of the wire in the corner of the picture.
  4. Write in your notebook, then answer the questions.

The tester

Simulation

The simulation loads here.

Why wires have a core and a cover

Metals such as copper, aluminium and steel are conductors. So is graphite, the pencil lead, though not as good a one. Plastic, rubber, glass, paper and dry wood are insulators.

Both kinds are useful. A wire has a copper core to carry the current and a plastic cover so that the current stays in the wire and doesn’t flow through you. Plugs have metal pins inside a plastic case for the same reason.

My notebook

You put a paper clip in the gap and the bulb lights. What does that show?

Why do wires have a plastic cover?

With a pencil lead in the gap, the bulb glows dimly. What does that tell you?

6Find the mistake 5 of 5, then look back

Safe at home

Where is electricity dangerous at home, and what keeps us safe?

The batteries in this lesson are safe to touch. Mains electricity, from the power points at home, is not. It can kill. Find the six hazards in this home, then check Sam’s safety poster.

Mains electricity flows through the same kind of loop as your battery circuits, and the same ideas apply: it flows through conductors, and your body is a conductor. A safety switch on the switchboard watches the current in a circuit. If some of the current leaks away, such as through a person, it turns the power off in a fraction of a second.

Find the mistake

There are six hazards in the picture and three mistakes on Sam’s poster.

Click each hazard you find, and read what should be done instead. Make a fault at the kettle to see the safety switch work. Then mark each line of Sam’s poster Right or Wrong.

On this screen

  1. Find the six hazards in the kitchen and the bathroom.
  2. Press Make a fault at the kettle and watch the safety switch.
  3. Mark each line of Sam’s poster Right or Wrong.
  4. Answer the questions, then look at your results for the whole lesson.

A kitchen and a bathroom

Simulation

The simulation loads here.

Staying safe

The Queensland Electrical Safety Office’s advice for homes includes: install safety switches and test them every three months; replace frayed leads and damaged equipment straight away, because “Wrapping tape around damaged leads won’t protect you from a shock”; put dummy plugs in unused power points; never overload a power point with stacked double adaptors; and “Keep electrical equipment away from bath tubs and sinks that children may use.”

Switch off at the power point before you unplug, and hold the plug, not the lead. Keep electrical equipment away from water: the Office’s words are “Water and electricity can be a lethal mix.”

My notebook

A lead is frayed. What should be done?

What does a safety switch do?

Why shouldn’t a hair dryer be used next to a bath?

You need more plugs than the power point has. What is the safe choice?

Printable activity

Circuit doctor: fix the circuits and test the materials

Two pages. Page 1 has four circuits that won’t light, each to diagnose, fix and draw with the standard symbols; page 2 is a conductor test to do with a battery, a bulb and ten things from the classroom.

For teachers

Curriculum

Australian Curriculum: Science, Version 9, Year 6, Science understanding, Physical sciences. The lesson teaches this content description:

AC9S6U03 investigate the transfer and transformation of energy in electrical circuits, including the role of circuit components, insulators and conductors

  • identifying necessary components for an electric circuit such as a source of electrical energy and conducting material such as metal wires
  • constructing a real or virtual circuit to examine requirements to allow the flow of electricity, including exploring the construction and role of switches
  • constructing representations of electrical circuits and their components using accepted conventions
  • examining the purpose of different components such as switches and bulbs and exploring use of ammeters to measure current
  • investigating different electrical conductors and insulators and examining why they may be used
  • exploring how electricity is used in the home and identifying electrical hazards and safety measures used to mitigate these hazards

The second quote gives ACARA’s six elaborations for it, which are examples, not requirements. Each part of the content description is covered on these screens:

  • The transfer and transformation of energy in electrical circuits: screen 1 names the battery as the store of energy, the current as what carries it round the loop and the bulb as where it becomes light and heat; screen 4 shows the battery’s stored energy draining while the current stays the same all the way round; q-energy, n-after and the notebook on screen 4.
  • The role of circuit components: the battery, bulb, switch and wires on screens 1 and 2, the ammeter on screen 4, and the symbols for each on screen 3; q-loop, q-switch, q-symbol and q-match.
  • Insulators and conductors: the tester on screen 5, the glass of the bulb on screen 2, and the copper core and plastic cover of a wire; q-glass, q-cond, q-insul and q-lead.
  • The elaborations: the components a circuit needs, and building a virtual circuit to see what lets current flow, including the switch, on screens 1 and 2; representing circuits with accepted conventions on screen 3; the purpose of switches and bulbs, and ammeters to measure current, on screens 1 and 4; conductors and insulators and why they are used on screen 5; and electricity in the home, its hazards and safety measures on screen 6.

The lesson also works on these content descriptions. Screen 4 has students decide whether three claims about circuits are right before they switch on, then test them with ammeters, the kind of reasoned prediction about circuit function that ACARA gives as an example for AC9S6I01; the ammeter readings in amperes on screen 4 match AC9S6I03’s examples of a multimeter and the unit ampere; screen 3 represents circuits with symbols and shows the direction of electricity flow, as AC9S6I04’s elaboration describes; and screen 6 draws on the safety advice that AC9S6H02’s elaboration mentions, electrical device guidelines for children’s safety.

AC9S6I01 pose investigable questions to identify patterns and test relationships and make reasoned predictions

AC9S6I03 use equipment to observe, measure and record data with reasonable precision, using digital tools as appropriate

AC9S6I04 construct and use appropriate representations, including tables, graphs and visual or physical models, to organise and process data and information and describe patterns, trends and relationships

AC9S6H02 investigate how scientific knowledge is used by individuals and communities to identify problems, consider responses and make decisions

It builds on Year 3’s AC9S3U03, “identify sources of heat energy and examine how temperature changes when heat energy is transferred from one object to another”, where students first meet energy being transferred from one object to another, and Year 4’s AC9S4U04, “examine the properties of natural and made materials including fibres, metals, glass and plastics and consider how these properties influence their use”, where metals, glass and plastics are sorted by their properties, and leads to Year 8’s AC9S8U05, “classify different types of energy as kinetic or potential and investigate energy transfer and transformations in simple systems”, which names the energy forms this lesson only describes.

How the lesson is taught

The lesson is built from erroneous examples: worked examples that contain a mistake, which the student has to find, explain and fix. Each screen after the first presents a fictional student’s work with one or more errors in it: four circuits that don’t light, three circuit diagrams, three claims about current, a results table for conductors and a safety poster. Students identify the error, test or fix it in the simulation, read why it was wrong, and write the mistake in their own words in the notebook. The circuit and current errors are the ones research on circuits keeps finding, so students meet their own likely misconceptions as someone else’s mistakes; the diagram, table and poster errors are everyday classroom ones.

Dieterich, Rumann and Rodemer’s (2025) systematic review of 40 studies found that erroneous examples “can enhance learning, but their benefits depend on how errors are explained or highlighted, how prompts are designed, and on learners’ prior knowledge and cognitive capabilities”. Contrasting erroneous examples, in which the wrong example is shown beside a correct one, “are more often effective than correct examples and problem-solving”, and prompts to “identify, explain, correct, or reflect on errors often promote deeper learning”, though they can overload students when the material is complex. Most of the research is in mathematics and medicine. Durkin and Rittle-Johnson (2012) found that Year 4 and 5 students who compared incorrect and correct examples of decimals learnt procedures and concepts better than students who compared two correct examples, “including reducing misconceptions”, and that the benefit did not depend on students’ prior knowledge. McLaren, Adams and Mayer (2015), with 390 middle school students, found no difference on an immediate test between erroneous examples and solving the same problems with feedback, but the erroneous examples group did better a week later (d = 0.33), even though students liked the problem solving more. Booth and colleagues (2013) concluded from an algebra study that “incorrect examples, either alone or in combination with correct examples, may be especially beneficial for fostering conceptual understanding”.

Screen 1 comes first so that students build a working circuit before they see broken ones, and each erroneous example can then be set against a correct one they made themselves. Each simulation lets them switch between the broken version and the fixed one, and screen 5 shows Ash’s table beside their own results. The review’s contrasting erroneous examples show the wrong and the right version at once; this lesson asks students to find and fix the error first, then compare. Using erroneous examples for a whole science lesson, and for drawings, claims and tables as well as worked problems, is this lesson’s own adaptation; the studies above used them for mathematics problems. Worked examples, which Ausgeology uses, are correct examples to study; erroneous examples are the same idea with a mistake built in.

The mistakes come from the research on students’ ideas about circuits. Quezada-Espinoza, Dominguez and Zavala (2023) summarise the models students hold: the sink or unipolar model, in which “A single wire connection between a device and a power supply is enough to run the electrical device” (Mia, screen 2); the clashing current model, in which electricity leaves both terminals and meets in the bulb (the second option in q-arrow, screen 3); the attenuation model, in which current “decreases gradually due to its consumption by devices in the circuit” (Ari and Bo, screen 4; Bo’s version, that the first bulb along the current gets more, is the sequential reasoning Shipstone describes); the shared current model, in which “devices within the circuit share the electric current equally”; the idea that the power supply gives “the same fixed current to every circuit” (Cam’s claim is the correct contrast); and local reasoning, in which students “focus on one point in the circuit” and “ignore what is happening elsewhere”. Shipstone (1984) found the current-flow models and sequential reasoning among secondary students (ComPADRE’s summary of the paper gives ages 11 to 18), Küçüközer and Kocakülah (2007) also report the consumption and constant-current ideas in secondary students, and Engelhardt and Beichner (2004) found the constant-current idea the most common one in secondary and university students.

Handle with care

  • Every circuit in this lesson is a battery circuit. Students must never try these ideas with mains electricity, and screen 6 says so. A battery circuit is safe to touch, but a short circuit makes wires and the battery hot, and the model shows that. With real batteries, students shouldn’t join the two ends of a battery with a bare wire, and lithium and button batteries don’t belong in the classroom circuit kit.
  • The lesson shows current direction from + to −. ACARA’s elaboration for AC9S6I04 asks only that the direction be shown (“indicating the direction of electricity flow”); the lesson uses the conventional direction, and OpenStax notes that “The direction of conventional current is the direction that positive charge would flow”, while the electrons in a metal wire move the other way. The model note on screen 1 says this; it doesn’t need to be taught at Year 6.
  • “Bulbs in a row” and “bulbs in separate loops” are the lesson’s plain words for series and parallel, which the word list gives in brackets. Use the words series and parallel if your class is ready for them.
  • The model’s ammeter readings (0.24 A for one bulb, 0.12 A for two in a row, 0.47 A from the battery for two in separate loops) come from a bulb of fixed resistance. OpenStax points out that a bulb’s resistance rises as it warms, so real readings won’t match exactly; the pattern will.
  • Screen 5’s results are for dry materials with a 3 V battery. Wet wood, salty water and a person conduct enough to matter with mains electricity even though they wouldn’t light a torch bulb. OpenStax gives salty water as a conductor and pure water as an insulator. Keep the lesson’s claim narrow: these materials, in this tester.
  • The home scene on screen 6 follows the Queensland Electrical Safety Office’s home advice, with NSW Fair Trading’s page for holding the plug rather than the cord. Students may know homes where leads are taped or adaptors stacked; the lesson treats these as things to fix, not as anyone’s fault. The Northern Territory and other states publish similar advice.
  • If someone says the pencil conducts through its wood, the wooden stick on the tray tests that: it has no graphite.

About the models

  • Screens 1 to 5 share one circuit model: a 3 V battery with an internal resistance of 0.3 ohms, bulbs of 12 ohms (0.25 A at 3 V), ammeters of 0.01 ohms and wires of 0.001 ohms. The currents are found by solving the loop, so series and parallel arrangements come out right without separate rules. A bulb’s brightness is drawn from the power it gets, with a dim bulb drawn a little brighter than its share so that it can be seen. Current above 3 A counts as a short circuit; a wire straight across the battery carries 10 A in the model.
  • Screen 1: three wires can be placed between six terminals. Any complete loop through the bulb lights it. The switch task needs the switch in the lit loop, then opened and closed.
  • Screen 2: each circuit is drawn as built; Fix it adds a wire, moves one wire end or closes the switch over 0.8 seconds. Priya’s wire on the glass is treated as joined to nothing.
  • Screen 3: the real circuit is drawn with the same parts as screen 1 and the diagram with the standard symbols; the student versions use the mistakes described in the data. Current arrows appear on the correct diagram only when the circuit is on.
  • Screen 4: the battery’s stored energy is a bar that empties at a rate proportional to the current the battery supplies; one bulb empties it in about 60 seconds. The needles take about a second to settle.
  • Screen 5: metals and the coin have 0.05 ohms in the gap, the pencil lead 6 ohms, so the bulb glows dimly, and insulators let through nothing the bulb could show.
  • Screen 6: a fault at the kettle shows current leaking for 1.2 seconds before the safety switch trips, so that students can see it; the words say a real switch acts in a fraction of a second.
  • With reduced motion, each run is worked out at once and the drawing shows how it ends.

Where sources disagree and what to check

  • Erroneous examples and worked examples: in Dieterich and colleagues’ review, erroneous examples beat correct examples in nine of 21 comparisons, drew level in eleven and lost in one, so the evidence that they beat correct worked examples is mixed; contrasting erroneous examples beat correct examples in nine of 12 comparisons, mostly in mathematics, and lost in none. The lesson gives each error a correct version to compare with for that reason.
  • Effect sizes: Durkin and Rittle-Johnson’s study had 74 students in a single short session; McLaren and colleagues’ had 390 students and a delayed test. Neither was in science. Treat the method as promising for this topic rather than proven.
  • Pencil lead: how brightly the bulb glows depends on the pencil’s hardness and length. OpenStax Chemistry says graphite “is very soft and electrically conductive”. A short pencil stub, or the clips a few centimetres apart on the lead, gives the clearest glow. If a class pencil gives no glow, the lead’s resistance is too high for the bulb; a multimeter will still show it conducts.
  • The 5 cent coin: Australian 5 cent coins are a copper and nickel alloy, so they conduct. Coins coated in plastic or very dirty may test badly.
  • Safety switches: the Queensland Government says they “turn off the power in a fraction of a second if a leakage of current is detected”, and the Electrical Safety Office adds that “Circuit breakers are designed to protect circuit wiring and equipment, while safety switches protect people.” Some homes have older boards with no safety switch, and ACARA’s elaboration for AC9S6H02 mentions local authorities and underground power as another safety topic.

Answers at a glance

  • Screen 1: any loop from + through the bulb to − lights it; a wire from + to − with nothing else in the loop is the short circuit. q-loop a gap; q-energy the battery; q-switch no current flows anywhere in the loop.
  • Screen 2: Mia, no path back (option 2); Noah, both wires at the + end (option 1); Priya, the wire on the glass (option 3); Tom, the switch is open (option 2). q-onewire no path back to the other end; q-sameend move one wire to the − end; q-glass glass is an insulator.
  • Screen 3: Ava, lamp and wires; Ben, battery and switch; Chloe, lamp and wires. q-symbol a circle with a cross; q-match the diagram shows a circuit that would light; q-arrow from + round to −.
  • Screen 4: one bulb, all three ammeters 0.24 A; two in a row, 0.12 A everywhere and both bulbs dim; separate loops, A2 and A3 0.24 A, A1 0.47 A, both bright. Ari wrong, Bo wrong, Cam right. n-after 0.24 A; n-parallel about 0.48 A (the model shows 0.47 A); q-series both equally dim.
  • Screen 5: conductors are the copper wire, paper clip, foil, coin and pencil lead (dim); insulators are the ruler, rubber band, stick, marble and paper. Ash’s wrong rows: aluminium foil, pencil lead and wooden stick. q-cond a conductor; q-insul the plastic is an insulator; q-lead graphite conducts, but not as well as metals.
  • Screen 6: the frayed lead, the hair dryer by the bath, the stacked double adaptors, the toddler at the power point, the plug pulled by its lead, the taped lead. Poster: lines 1, 3 and 4 wrong, line 2 right. q-tape replace the lead; q-safety turns the power off in a fraction of a second when current leaks; q-water the current could flow through the water and a person; q-adaptor a power board or more power points.
  • Printable sheet: circuit A, one wire only; B, both wires on the same end of the battery; C, the switch is open; D, a wire on the glass of the bulb. Conductor test: the metals and the pencil lead conduct; the plastic, rubber, wood, glass and paper don’t.

Saved progress

Answers, notes and settings are saved only in this browser on this device. Nothing is sent anywhere.

References

Sources by screen

  • Method: Dieterich, Rumann and Rodemer (2025); Durkin and Rittle-Johnson (2012); McLaren, Adams and Mayer (2015); Booth, Lange, Koedinger and Newton (2013). Students’ ideas about circuits: Quezada-Espinoza, Dominguez and Zavala (2023); Shipstone (1984); Küçüközer and Kocakülah (2007); Engelhardt and Beichner (2004).
  • Screen 1: OpenStax College Physics 2e, 20.1 (a closed path for current; the ampere; conventional current), 20.2 (the voltage source supplies energy and the resistor converts it; a bulb’s resistance changes as it warms) and 20.6 (short circuits); OpenStax Physics, 19.1 (electrons move from the − terminal to the + terminal) and 19.2 (the battery uses chemical energy; a switch opens and closes the circuit).
  • Screen 2: OpenStax College Physics 2e, 18.2 (conductors and insulators; the glass rod as an insulator) and 20.1.
  • Screen 3: OpenStax Physics, 19.2 (circuit diagrams use lines and symbols); OpenStax College Physics 2e, 20.1 (schematics); the IET’s Circuits and symbols (the symbol names); ACARA’s elaboration for AC9S6I04 (the direction of electricity flow).
  • Screen 4: OpenStax College Physics 2e, 21.1 (the same current through each resistor in series; each resistor in parallel draws the same current it would alone; more current from the source in parallel), and 21.4 (ammeters in series).
  • Screen 5: OpenStax Physics, 18.1 (conductors such as metals, insulators such as rubber; copper, silver and aluminium); OpenStax College Physics 2e, 18.2 (salty water and pure water); OpenStax Chemistry 2e, 10.5 (graphite conducts).
  • Screen 6: Electrical Safety Office, Queensland (9 ways to make your home a safe zone; Electrical safety at home); Queensland Government (Electrical safety in the home); NSW Government (Common electrical hazards); OpenStax College Physics 2e, 20.6 (shock hazards).
  • Printable sheet: the same sources as screens 2, 3 and 5.
  • Word list: the sources for the screen where each word is first used.

Word list