Year 7 science · Physical sciences · AC9S7U04
Can a table push?
A book lies on a table and doesn’t move. Gravity is pulling the book down, so why doesn’t it fall? Many people say the table is just in the way. Physicists say the table pushes up on the book. In this lesson you test that idea a step at a time and decide when you are convinced.
A book on a table
A force is a push or a pull. Which forces act on the book? Turn the arrows on or off to show what you think now. Nobody expects you to be right yet, and you will see this diagram again on screen 8.
Your first diagram
DiagramThe diagram loads here.
How the lesson works
1 · Vote
Before each test, say whether you think the thing underneath pushes up, and how sure you are.
2 · Test
Try it in the simulation. Change one thing at a time and watch the force arrows.
3 · Compare
Decide what is the same and what is different about each case and the one before it.
Why you compare
You already know that a spring pushes back on your hand. Each step in this lesson changes the spring a little, until it has become a table. A comparison between two things that work in a similar way is called an analogy.
In one study, students taught with a chain of comparisons like this improved much more than the students they were compared with (Clement, 1993).
What we are learning
Which forces act on an object that isn’t moving, how to show forces with arrows, and what happens to an object’s motion when the forces on it are balanced or unbalanced.
I can
- 1explain how a table or a floor pushes up on an object that rests on it.
- 2show the forces on an object with force arrows of the right size and direction.
- 3work out an object’s weight from its mass.
- 4say whether the forces on an object are balanced or unbalanced.
- 5explain what friction is and which way it acts.
- 6predict how an unbalanced force changes an object’s motion, and how the object’s mass affects the change.
- 7say where a comparison between two things fits and where it stops working.
Australian Curriculum: Science, Version 9, Year 7, AC9S7U04: “investigate and represent balanced and unbalanced forces, including gravitational force, acting on objects, and relate changes in an object’s motion to its mass and the magnitude and direction of forces acting on it”. The teacher notes at the end show which screen covers each part.
My notebook
Which of these is a force?
Forces: practical and force arrows
Three pages: a practical that bends a metre ruler with masses and measures weights with a force meter, a page of force arrow diagrams to draw, and a page of explanations to write.
2Start from what you know
A spring pushes back
What pushes back when you push down on a spring?
Press down on a spring and you can feel it push up on your hand. This screen starts there. Then you swap the hand for a book, and the spring for a block of foam.
On this screen
- Vote on the three cases before you try them.
- Push the hand down on the spring. Watch the two force arrows.
- Swap the hand for a book, then the spring for foam, and compare the cases.
A hand, a book, a spring and some foam
SimulationThe simulation loads here.
Force arrows
A force arrow shows a force on a diagram. The arrow points the way the force pushes or pulls, and a longer arrow means a bigger force. Forces are measured in newtons (N).
A squashed spring pushes back
When the book goes on the spring, the spring is compressed. A compressed spring pushes back, and the more it is squashed, the harder it pushes. The book sinks until the spring’s push up is as big as the pull of gravity on the book. Then the two forces on the book are the same size and act in opposite directions, and the book stays still.
The foam does the same thing. It is squashed by the book, and it pushes back.
Same and different
On a diagram, one force arrow is twice as long as another. What does that show?
You put a second book on top of the first. What happens to the spring?
3Step across
From a spring to a board
Does a board push back the way a spring does?
Lay a thin board across two supports and put a book on it. The board bends, a bit like a spring. Now make the board thicker, one step at a time, and see what happens to the bend.
On this screen
- Vote on the thin board and the thick board before you test them.
- Add books to each board and read the bend. Magnify it when it gets too small to see.
- Record at least four readings and look for the pattern.
Books on a board
SimulationThe simulation loads here.
Every board bends
The thick board bent too little to see, but the bend was there, and it grew each time you added a book. A bent board pushes back, and the more it bends, the harder it pushes. A thick board only has to bend a tiny amount to push up as hard as the books are pulled down.
Same and different
The 24 mm board looks flat with three books on it. What did the magnified view show?
4Reach the table
The table
Is a table top just a very thick board?
If a table pushes up on a book the way the boards did, it has to bend a little when the book goes on. The bend is far too small to see. A beam of light can show it, and a look inside the table top shows where the push comes from.
On this screen
- Load the table and watch the spot of light on the wall.
- Look inside the table top as the load goes on.
- Vote again, then see all your votes together.
A light beam and a mirror
SimulationThe simulation loads here.
Inside the table top
ModelThe model loads here.
Your votes so far
ChartYour votes load here.
The support force
A table top bends a tiny amount under a book. Its particles are pushed closer together, and they push back, much as a squashed spring does. The table bends until its push up on the book is as big as the pull of gravity on the book.
The push of a surface on an object that rests on it is called the support force. Physicists also call it the normal force.
My notebook
The spot of light moved when the load went on the table. What does that show?
Sam says: “The table doesn’t push. It is just in the way.” Which reply uses the evidence from this lesson?
5Measure
Weight and balance
How big is the pull of gravity on an object?
The pull of gravity on an object is called its weight. Weight is a force, so it is measured in newtons, with a force meter. Hang some masses on a force meter and find the pattern.
On this screen
- Hang a mass on the force meter and record its weight. Do this for at least four masses.
- Read the graph. How many newtons is each kilogram pulled with?
- Move the person around the Earth and watch which way their weight points.
A force meter
SimulationThe force meter loads here.
Weight and mass
Mass is the amount of matter in an object, measured in kilograms. Weight is the pull of gravity on the object, measured in newtons. On Earth, gravity pulls each kilogram with about 10 N (9.8 N, to be more exact). To find a weight in newtons, multiply the mass in kilograms by 10.
Which way is down?
DiagramThe diagram loads here.
Balanced forces
Earth’s gravity pulls every object towards the centre of the Earth. A book on a table has two forces on it: its weight, pulling it down, and the support force from the table, pushing it up. The two forces are the same size and act in opposite directions, so they are balanced. Balanced forces don’t change an object’s motion, so the book stays still.
A student in Darwin and a student in London each drop a ball. Which way does each ball fall?
A 1 kg book lies still on a table. Its weight is about 10 N. Which statement is right?
6Compare again
Push the book
What holds a book back when you push it?
Push a book gently along a table and it doesn’t move. Something must be pushing back on it along the table top. Use another chain of comparisons to find out what, starting with two brushes.
On this screen
- Say what you think holds the book back.
- Slide two brushes, then sandpaper on wood, then a book on a table. Magnify the surfaces.
- Push a block harder and harder, and watch the friction arrow.
Surfaces up close
ModelThe model loads here.
Push a block
SimulationThe simulation loads here.
Friction
Friction is a force between two surfaces that touch. It acts along the surfaces. It pushes against sliding, and it pushes against a push that is trying to start the sliding. While your push is small, friction grows to match it, the forces on the block are balanced, and the block stays still. Friction can only grow so far. Push harder than that and the block slides.
Where the comparison stops working
The brushes are a good picture of bumps catching on each other. Bumps are only part of the cause. The particles of the two surfaces also pull on each other where they touch, so even very smooth surfaces have friction (Urone and Hinrichs, 2022). The brushes can’t show that part.
A book slides to the right across a table. Which way does friction push on the book?
Which statement about friction is right?
The brushes were compared with a book on a table. What does that comparison leave out?
7Unbalance the forces
When forces don’t balance
What happens to an object when the forces on it don’t balance?
Balanced forces leave an object’s motion as it is. When one force is bigger than the force against it, some force is left over, and the motion changes. The object starts moving, speeds up, slows down, stops or turns. Forces like this are unbalanced.
On this screen
- Run the trolley three times. Change one thing each time: the push, the friction or the mass.
- Compare the lines on the graph.
- Give the rolling ball a sideways push and watch its path.
A trolley on a track
SimulationThe simulation loads here.
A ball rolling across a floor
SimulationThe simulation loads here.
Balanced and unbalanced forces
When the forces on an object are balanced, its motion doesn’t change. A still object stays still, and a moving object keeps moving at the same speed in the same direction.
When the forces are unbalanced, the motion changes in the direction of the force left over, which is called the resultant force. A bigger force left over changes the motion faster. A bigger mass changes its motion more slowly for the same force.
A moving object doesn’t need a force to keep it moving. On Earth things slow down because friction is an unbalanced force on them. With no friction, the trolley kept its speed after the push stopped.
A trolley is rolling along. The push forwards is 4 N and the friction backwards is 4 N. What happens to its speed?
The same push acts on a 1 kg trolley and a 4 kg trolley, with no friction. Which one gains speed faster?
A car is moving forwards and slowing down. Which way does the force left over point?
8Use it
Use it on something new
Can you draw the forces on things you haven’t tested?
Here are four new cases. For each one, set the direction and the size of every force arrow, then check your diagram.
Draw the force arrows
DiagramThe diagrams load here.
A stretched cord pulls back
A lamp stretches the cord it hangs from by a tiny amount, as a hanging mass stretches a rubber band, and the stretched cord pulls back. The pull of a stretched rope, cord or cable is called tension.
Your first diagram and your votes
CompareYour first diagram and your votes load here.
What the comparisons showed
A spring and a table are alike in the way that matters here. Each one is squashed by a load, and each pushes back harder the more it is squashed. They differ in how far they squash. You can watch a spring squash, and a table’s squash is far too small to see.
My notebook
A lamp hangs still from a cord. What pulls up on the lamp?
You stand still on a floor. Which forces act on you?
The lesson compared a table with a spring. In which way are the two alike?
Forces: practical and force arrows
Three pages: a practical that bends a metre ruler with masses and measures weights with a force meter, a page of force arrow diagrams to draw, and a page of explanations to write.
For teachers
Curriculum
Australian Curriculum: Science, Version 9, Year 7, Science understanding, Physical sciences. The lesson teaches this content description:
AC9S7U04 investigate and represent balanced and unbalanced forces, including gravitational force, acting on objects, and relate changes in an object’s motion to its mass and the magnitude and direction of forces acting on it
- investigating the effects of applying different forces to familiar objects of the same and different mass
- analysing the effect of balanced and unbalanced forces on an object’s motion, such as starting, stopping and changing direction
- measuring the magnitude of a force using a force meter and representing the magnitude and direction of forces acting on an object using force arrow diagrams
- investigating how Earth's gravitational force is the attractive force which pulls objects to the centre of Earth and its magnitude is related to the mass of an object
The second quote gives the first four of ACARA’s eight elaborations for it, which are examples, not requirements. The lesson uses these four. It leaves the other four (levers and pulleys, gravity in space, boomerangs, and bows and arrows and spearthrowers) for other lessons. Each part of the content description is covered on these screens:
- Investigate and represent balanced and unbalanced forces acting on objects: screens 2 to 4 (the support force on a hand, a book and a stack of books), screen 5 (balanced forces on a book), screen 6 (a push balanced by friction), screen 7 (a trolley with balanced and unbalanced forces) and screen 8 (force arrow diagrams for four new cases); n-spring, q-arrow-len, n-board, n-support, q-balanced, n-friction, n-left, q-lamp, q-floor.
- Including gravitational force: screen 5 (weights measured with a force meter, the weight and mass graph, and the direction of gravity); n-weight, q-down.
- Relate changes in an object’s motion to its mass and the magnitude and direction of forces acting on it: screen 6 (when the block starts to slide) and screen 7 (the trolley runs with different pushes, friction and masses, and the ball that is pushed sideways); q-steady, q-mass, q-slowing.
The lesson also works on these content descriptions. Students predict by voting before the tests on screens 1 to 3. ACARA asks for reasoned predictions, so ask them for their reasons (AC9S7I01). They build force arrow diagrams on screen 8 and on the sheet and fill in the sheet’s tables by hand, and on the screens the page draws the tables and graphs from the readings they record (AC9S7I04). They find the patterns in the bend of a board and in weight against mass (AC9S7I05). The simulated readings have no anomalies for them to find.
AC9S7I01 develop investigable questions, reasoned predictions and hypotheses to explore scientific models, identify patterns and test relationships
AC9S7I04 select and construct appropriate representations, including tables, graphs, models and mathematical relationships, to organise and process data and information
AC9S7I05 analyse data and information to describe patterns, trends and relationships and identify anomalies
How the lesson is taught
The lesson uses bridging analogies, a method John Clement and colleagues developed for ideas in mechanics that students find hard to believe. It starts from an anchor, a case where the student’s own sense of what happens already agrees with the physics: a spring pushes back on a hand. It then moves through bridging cases, each a small step from the one before (a book on a spring, a book on foam, books on a thin board, books on a thick board), to the target, a book on a table. Screen 4 adds a model of the table top as particles joined by springy bonds, and a light beam that shows the table top bending. Screen 6 uses a shorter chain for friction: two brushes, sandpaper on wood, then a book on a table. That chain was written for this lesson and isn’t taken from a source in the reference list.
Before each test students vote on whether the thing underneath pushes up and say how sure they are. After it they write what is the same and what is different about two neighbouring cases. They vote on the table again on screen 4, after the evidence. Screen 4 shows all the votes in one chart, and screen 8 shows them again beside the student’s first diagram.
Clement (1993) reports lessons of this kind on the forces from static objects, friction and Newton’s third law, and large differences in gains from pre-test to post-test in favour of the group that had them. In an earlier interview study, 14 of 21 high school students who had not studied physics said at first that a table does not push up on a book. Seven of the 14 were given a bridging explanation and seven a control explanation. All seven with the bridging explanation ended up confident that the table pushes up, and five of the seven with the control explanation still answered the table question incorrectly (Brown and Clement, 1987). Yilmaz, Eryilmaz and Geban (2006) tested 119 high school students before and after three weeks of teaching, and found the strategy effective in reducing the number of misconceptions about normal forces, friction, tension, gravity, inertia and Newton’s third law. Bryce and MacMillan (2005) worked with 21 students aged 15 and found evidence that, for some of them, bridging analogies brought about conceptual change better than didactic teaching did.
The students in the last three studies were in high school or aged 15, so older than Year 7. The abstract of Clement (1993) doesn’t give the age of the students. Best Evidence Science Teaching, written for ages 11 to 14, suggests discussing weights added to a hand. Oak National Academy teaches the beam that bends more under a bigger mass, and the particles in a floor that push back when they are squashed together, in a Year 9 lesson in England (ages 13 to 14).
Brown and Clement (1989) propose a preliminary list of what makes the method work. The student needs an anchor they can use. The link between the anchor and the target may need to be built step by step with bridging cases. The student may need to do the reasoning in discussion, because presenting the analogy in a text or a lecture may not be enough. The analogies may also need to lead the student to a new model that explains the target. The votes, the same-and-different notes and the particle model are in the lesson for those reasons. A student who votes no on the spring has not accepted the anchor, so have them press a real spring or a sponge with a finger before going on.
With a class, take each vote by a show of hands before the test, and ask two students who disagree to say why. Plan for about two lessons of 50 to 60 minutes: screens 1 to 4, then screens 5 to 8.
Handle with care
- Students often believe that an object which isn’t moving has no forces on it: a hand can make and feel forces, but a book lying on a table is free of them (Monash University and Victorian Department of Education and Training, n.d.). Oak National Academy gives the misconception as “There is a downwards force on a surface, but no upward force, the surface just gets in the way.” Expect some students to hold it to the end of screen 3.
- Other ideas to listen for, from the list in Best Evidence Science Teaching (n.d.): “if there is motion, there is a force acting”, “if there is no motion, then there is no force acting” and “constant speed results from a constant force”. On screen 7, running the trolley with no friction shows it keeping its speed after the push stops.
- The two arrows on the book are both forces on the book, one from the Earth and one from the table. They are balanced forces. They are not the pair of forces in Newton’s third law, which act on two different objects. The lesson doesn’t teach the third law, and Best Evidence Science Teaching (n.d.) notes that “for every action (force) there is an equal and opposite reaction” confuses students aged 11 to 16.
- Students mix up weight and mass (Oak National Academy, n.d.). The lesson keeps kilograms for mass and newtons for weight.
- The lesson calls the table’s push the support force. Urone and Hinrichs (2022) call it the normal force, and Oak National Academy calls it the normal reaction force.
- The printable practical loads a metre ruler with 100 g masses. Oak National Academy marks its version of this practical as needing a risk assessment and adult supervision. Use a wooden ruler with no cracks, laid flat, keep to the masses on the sheet, keep fingers out from under the ruler, and follow your school’s risk assessment. The practical hasn’t been tried out for this lesson, so run it yourself first. By the beam formula in the next section, a wooden metre ruler 25 mm wide and 6 mm thick across a gap of 90 cm should bend between 2 and 3 mm for each 100 g if its wood is as stiff as the pine on screen 3. On a millimetre scale the steps will look a little uneven. A plastic ruler bends much more, so use a wooden one.
- The light beam on screen 4 is a simulation. The University of Maryland runs the demonstration with a laser, a mirror and an aluminium beam. If you set one up, follow your school’s rules for lasers.
About the simulations and the numbers
- The spring and the foam on screen 2 squash by 2 mm and 1.25 mm for each newton. Those figures were chosen for the picture. The hand’s own weight is left out.
- The bends on screen 3 are calculated. For a beam held up at both ends with a load at its middle, the bend is load × span³ ÷ (48 × E × second moment of area), where E is the modulus of elasticity of the material, and for a rectangular board the second moment of area is width × thickness³ ÷ 12 (Engineering ToolBox, 2008, 2009). The boards are 200 mm wide and cross a gap of 1 m. Their modulus of elasticity is 12,700 MPa, the figure WoodSolutions (n.d.) gives for MGP12 structural pine. Each book has a mass of 1 kg and a weight taken as 10 N. That gives bends of 36.5 mm, 4.56 mm, 0.57 mm and 0.0712 mm for each book on boards 3 mm, 6 mm, 12 mm and 24 mm thick. Doubling the thickness makes the bend eight times smaller. The screens round each figure after calculating it, so the last digit of a sum can be out by one. A real board will differ, because the board’s own weight is left out and the books are treated as one load at the middle. Don’t copy the 3 mm board with real timber. By the bending stress formula on the same Engineering ToolBox page, three books would put about 25 MPa on it, close to the 28 MPa bending strength WoodSolutions gives for MGP12.
- The table top on screen 4 is treated as a board 40 mm thick, 200 mm wide and across the same 1 m gap, which bends 0.0154 mm for each book. The mirror stands at one end of the top, where the top tilts by 3 × bend ÷ span. That tilt comes from the same beam theory, but it is not on the Engineering ToolBox page. The angle of reflection equals the angle of incidence (Urone and Hinrichs, 2022), so the reflected beam turns through twice the tilt. On a wall 4 m away the spot moves 0.369 mm for each book and a further 11.1 mm when someone leans on the table with 300 N. The picture of the particles exaggerates the squash enormously, and it shows only squashing. In a shelf that sags under books, the top surface is compressed and the bottom surface is stretched (Moebs, Ling and Sanny, 2016).
- The force meter on screen 5 uses 9.8 N for each kilogram (Urone and Hinrichs, 2022) and shows two decimal places. The questions use 10 N for each kilogram, as Oak National Academy does.
- The block on screen 6 has a weight of 10 N. The largest friction before it slides, and the friction while it slides, are the support force multiplied by the two friction coefficients for each pair of surfaces in Table 5.1 of Urone and Hinrichs (2022). The pictures of the surfaces are drawings, not photographs.
- On screen 7 the trolley’s speed changes each second by the force left over divided by the mass (Urone and Hinrichs, 2022, section 4.3). The push lasts 3 seconds of a 6 second run. Friction acts while the trolley is moving. A push that is no bigger than the friction doesn’t start the trolley moving. The friction is the value the student picks. It doesn’t grow with the trolley’s mass, as it would on a real track.
- The votes chart shows only the student’s own votes.
Where sources disagree, and what to check
- Oak National Academy uses “about 10 N” for the force on 1 kg, and Urone and Hinrichs (2022) give 9.8 N. The lesson gives both. The force meter on screen 5 uses 9.8 and everything else uses 10.
- Oak National Academy says friction “is caused by the roughness of surfaces”. Urone and Hinrichs (2022) say that much of it comes from attractive forces between the molecules of the two surfaces, “so that even perfectly smooth surfaces are not friction-free”. Screen 6 shows the bumps first and then says what that picture leaves out.
- The studies of the method that describe their students worked with high school students or 15-year-olds. Watch how your Year 7 students vote, and spend longer on the spring and the thin board if many are still voting no.
Answers at a glance
- Screen 1: q-force, the push of a hand on a door.
- Screen 2: n-spring 15 N; q-arrow-len, the force is twice as big; q-squash-more, it is squashed more and pushes up harder.
- Screen 3: bend for each book, 36.5 mm (3 mm board), 4.56 mm (6 mm), 0.57 mm (12 mm), 0.0712 mm (24 mm). n-bend 1.5 mm; q-thick, it bends a tiny amount, and a little more with each book; n-board 30 N.
- Screen 4: the spot moves 0.369 mm for each book and a further 11.1 mm when someone leans on the table. q-mirror, the table top bent a little; q-in-the-way, the table bends a little and a bent table pushes back; n-support 20 N.
- Screen 5: the force meter reads 9.80 N for 1 kg, and the graph is a straight line through zero. n-weight 30 N; q-down, towards the centre of the Earth; q-balanced, the support force is 10 N upwards.
- Screen 6: wood on wood, the block slides when the push passes 5 N, and friction is then 3 N. Rubber on dry concrete, 10 N and 7 N. Ice on ice, 1 N and 0.3 N. Steel on oiled steel, 0.5 N and 0.3 N. q-fr-dir, to the left; n-friction 4 N; q-fr-force, friction is a force; q-fr-limit, that the particles of the two surfaces pull on each other.
- Screen 7: n-left 5 N; q-steady, it stays the same; q-mass, the 1 kg trolley; q-slowing, backwards.
- Screen 8: lamp, weight 20 N down and the pull of the cord 20 N up; person, weight 500 N down and support force 500 N up; box, weight 100 N down, support force 100 N up, push 30 N to the right and friction 30 N to the left; trolley, weight 20 N down, support force 20 N up, push 8 N to the right and friction 2 N to the left. q-lamp, the stretched cord; q-floor, weight downwards and the support force upwards; q-analogy, both are squashed by a load and push back on it.
- Printable sheet: the ruler bends further for each mass that is added, by about the same amount each time, and it springs back when the masses come off. The bent ruler pushes up on the finger, so it was pushing up on the masses too. The force meter reads about 1 N more for each 100 g. The weights are 1 N, 2 N, 5 N, 10 N and 20 N. Force arrows: book, weight 10 N down and support force 10 N up; lamp, weight 20 N down and the pull of the cord 20 N up; person, weight 500 N down and support force 500 N up; block, weight 10 N down, support force 10 N up, push 3 N to the right and friction 3 N to the left; trolley, weight 20 N down, support force 20 N up, push 8 N forwards and friction 2 N backwards; apple, weight 1 N down and no other force. Page 3, question 4: a load squashes or bends both the spring and the table, and each pushes back harder the more it is squashed; the spring’s squash is easy to see and the table’s is far too small to see.
Saved progress
Answers, votes, notes and simulation records are saved only in this browser on this device. Nothing is sent anywhere.
References
- Australian Curriculum, Assessment and Reporting Authority (ACARA) (2022). Australian Curriculum: Science, Version 9, Years 7 to 10 curriculum content. Australian Curriculum website.
- Best Evidence Science Teaching (n.d.). Key concept PFM1.2: Describing forces; Key concept PFM1.3: Balanced and unbalanced forces. University of York Science Education Group and the Salters’ Institute.
- Brown, D. E. and Clement, J. (1987). Overcoming misconceptions in mechanics: A comparison of two example-based teaching strategies. Paper presented at the Annual Meeting of the American Educational Research Association, Washington, D.C., 20 to 24 April 1987. ERIC ED283712.
- Brown, D. E. and Clement, J. (1989). Overcoming misconceptions via analogical reasoning: Abstract transfer versus explanatory model construction. Instructional Science, 18(4), 237–261. https://doi.org/10.1007/BF00118013
- Bryce, T. and MacMillan, K. (2005). Encouraging conceptual change: The use of bridging analogies in the teaching of action–reaction forces and the ‘at rest’ condition in physics. International Journal of Science Education, 27(6), 737–763. https://doi.org/10.1080/09500690500038132
- Clement, J. (1993). Using bridging analogies and anchoring intuitions to deal with students’ preconceptions in physics. Journal of Research in Science Teaching, 30(10), 1241–1257. https://doi.org/10.1002/tea.3660301007
- Engineering ToolBox (2008). Area moment of inertia with definitions, formulas & calculator.
- Engineering ToolBox (2009). Beams supported at both ends with continuous and point loads: Stress, deflection, formulas and calculators.
- Moebs, W., Ling, S. J. and Sanny, J. (2016). University Physics Volume 1, section 12.3. OpenStax.
- Monash University and Victorian Department of Education and Training (n.d.). Forces and motion: forces on stationary objects. Critical teaching ideas, Science Continuum F to 10.
- Oak National Academy (n.d.). Key Stage 3 science lessons: Balanced and unbalanced forces; Friction; Gravitational force and weight; The force of a floor.
- University of Maryland Physics Lecture-Demonstration Facility (2020). B4-21: Deflection of beam, optical lever. Last modified 31 July 2020.
- Urone, P. P. and Hinrichs, R. (2022). College Physics 2e, sections 4.1, 4.2, 4.3, 4.5, 5.1 and 25.2. OpenStax.
- WoodSolutions (n.d.). Structural grading.
- Yilmaz, S., Eryilmaz, A. and Geban, O. (2006). Assessing the impact of bridging analogies in mechanics. School Science and Mathematics, 106(6), 220–230. https://doi.org/10.1111/j.1949-8594.2006.tb17911.x
Curriculum attribution
© Australian Curriculum, Assessment and Reporting Authority (ACARA) 2010 to present, unless otherwise indicated. This material was downloaded from the Australian Curriculum website (Website) (accessed 10 November 2026) and was not modified. The material is licensed under CC BY 4.0 Attribution 4.0 International Deed. Version updates are tracked in the ‘Curriculum version history’ section on the ‘About the Australian Curriculum’ page of the Australian Curriculum website.
ACARA does not endorse any product that uses the Australian Curriculum or make any representations as to the quality of such products. Any product that uses material published on this website should not be taken to be affiliated with ACARA or have the sponsorship or approval of ACARA. It is up to each person to make their own assessment of the product, taking into account matters including, but not limited to, the version number and the degree to which the materials align with the content descriptions and achievement standards (where relevant). Where there is a claim of alignment, it is important to check that the materials align with the content descriptions and achievement standards (endorsed by all education Ministers), not the elaborations (examples provided by ACARA).
Sources by screen
- Screen 1: Clement (1993); Oak National Academy, The force of a floor (the idea that the surface is just in the way); Urone and Hinrichs (2022), section 4.1 (a force is a push or a pull).
- Screen 2: Brown and Clement (1987) (the hand on a spring, the book on a spring, and foam rubber as a picture of the table); Best Evidence Science Teaching, PFM1.2 (force arrows); Urone and Hinrichs (2022), section 4.5 (a restoring force like a deformed spring).
- Screen 3: Brown and Clement (1987) (the flexible board); Oak National Academy, The force of a floor (a beam bends more under a bigger mass and pushes back harder); Engineering ToolBox (2008, 2009) and WoodSolutions (the sizes of the bends).
- Screen 4: University of Maryland (the light beam and mirror); Brown and Clement (1987) (the table as molecules joined by springy bonds); Oak National Academy, The force of a floor (squashed particles push back); Urone and Hinrichs (2022), section 4.5 (the table sags until its force equals the weight; the normal force) and section 25.2; Monash University and Victorian Department of Education and Training (all objects are squashed a little by a force).
- Screen 5: Urone and Hinrichs (2022), sections 4.1 and 4.3 (the spring scale, weight, 9.8 N for 1 kg, mass, the direction of gravity); Oak National Academy, Gravitational force and weight (about 10 N for 1 kg) and Balanced and unbalanced forces.
- Screen 6: Urone and Hinrichs (2022), section 5.1 (friction, its direction, rough surfaces, attraction between molecules, Table 5.1); Oak National Academy, Friction.
- Screen 7: Oak National Academy, Balanced and unbalanced forces; Best Evidence Science Teaching, PFM1.3; Urone and Hinrichs (2022), sections 4.2 and 4.3 (no friction, mass and changes in motion).
- Screen 8: Urone and Hinrichs (2022), section 4.5 (tension); Monash University and Victorian Department of Education and Training (the rubber band).
- Word list: the sources for the screen where each word is first used.